VIBE Bass Kit

The VIBE 3000 watt BASS KIT is specifically designed to gain maximum output from high power BASS systems. Featuring the best BASS specific cables from the VIBE CriticalLinkTM Range.

Contents:

- FLATLINESTM4AWG PWR Power and Ground cable : FLAT Heavy Duty 4 gauge power cable developed to maximise voltage transfer from battery to amplifier – highly flexible easing installation. All cable is terminated with crimped terminal rings. 6m Power. 1m Ground
- FLATBASSTM RCA SolidCoreTM Interconnect : Specifically developed for use in BASS SYSTEMS featuring oversized SolidCoreTM OFC signal wire – allowing a heavier current to be passed down the cable. 5 metre
- FLATBASSTM 13 SPK Bass speaker cable : Specially developed for BASS applications Uses SolidCoresTM that can handle and sustain considerably more power than conventional speaker cable. 3 metres
- FLATLINES TM remote 18 : With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers. 5 metres
- VIBE 140 amp circuit breaker : The VIBE circuit breaker is rated at a massive 140 amps and offers critical protection to your system if the system over powers or short circuits the breaker will cut in and save your equipment.
- All cable is terminated with crimped terminal rings in place and accessory fitting kit.

This kit is compatible with the majority of amplifiers on the market VIBE recommends this kit for all VIBE BASS monoblock amplifiers new, current and old models.

VIBE Stereo Kit

The VIBE 1500 watt STEREO KIT is specifically designed to gain maximum output from high power full range systems. Combining the best full range cables from the VIBE CriticalLink TM range.

Contents:

- FLATLINESTM 8AWG PWR Power and Ground cable : FLAT 8 gauge power cable developed to maximise voltage transfer from battery to amplifier – highly flexible easing installation. All cable is terminated with crimped terminal rings. 6 metres Power. 1 metre Ground
- FLATSTEREOTM RCA – OFC high definition full range interconnect : Delivering the fullest signal possible from source to amplifier – the cable make up has been developed to run flat with left and right cables running parallel both with individual screening but sharing an outer FLAT jacket easing installations.
- FLATLINES TM remote 18 : With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers.
- FLATSTEREOTM speaker cable : OFC high definition speaker cable is produced from super fine OFC copper strands.
- AGU Fuse Holder : The water proof fuse holder should be located 12″ approx from battery & holds glass type AGU fuses giving reliable system protection.(Pre-wired onto Power cable) All cable is terminated with crimped terminal rings in place and accessory fitting kit.

This kit is compatible with the majority of amplifiers on the market VIBE recommends this kit for all VIBE full range STEREO amplifiers new, current and old models.