FLATLINES™ Power and Ground Cable

VIBE FLATLINESTM power cable has been developed to maximised voltage transfer from battery to amplifier - The cable has 2 main lines running side by side which are made up of fine copper strands - This design makes the cable flat allowing us to make very slim heavy duty power cable which is highly flexible easing installation into vehicles

Available in: can be brought in system kits or by the roll or off the roll.

• Model: FLATLINES 8 PWR ­ 8 gauge red power cable
• Model: FLATLINES 8 GND ­ 8 gauge black power cable
• Model: FLATLINES 4 PWR ­ 4 gauge red power cable
• Model: FLATLINES 4 PWR ­ 4 gauge red power cable
• Model: FLATLINES 0 PWR ­ 0 gauge red power cable
• Model: FLATLINES 0 GND ­ 0 gauge black power cable

FLATLINES™ Remote 18

The VIBE FLATLINES remote 18 power cable has been developed to maximised voltage transfer between the remote turn on output of the source unit to the amplifier with absolute minimal voltage drop.

With a current rating of 14 amps this cable can easily handle multiple amplifiers fed via a relay in high power systems. (only available in system kits, not sold separately) Features in all VIBE system kits.

FLATSTEREO™ High Definition full range Interconnect

The VIBE FLATSTEREO RCA is an OFC high definition full range interconnect ­ delivering the fullest signal possible from source to amplifier - the cable make up has been developed to run flat with left and right cables running parallel both with individual screening but sharing an outer FLAT jacket easing installation.

Available in:

• Model: FLATSTEREOTM RCA 1m ­ 1 metre full range interconnect
• Model: FLATSTEREOTM RCA 5m - 5 metre full range interconnect

FLATBASS™ ­ SolidCoreTM Bass interconnect

The VIBE FLATBASSTM interconnect has been specifically developed for use in BASS SYSTEMS - the cable make up has a unique super FLATTM design easing installation - Its trick ingredient is oversized SolidCore� OFC signal wires - allowing a heavier voltage to be passed down the cable. This is the central wire that caries the main signal from source to amplifier..

Available in:

• Model: FLATBASSTM RCA 1m ­ 1 metre BASS interconnect
• Model: FLATBASSTM RCA 5m - 5 metre BASS interconnect

FLATFLEX™ High Definition speaker cable

The delivery of power and signal to the speaker is the final CriticalLinkTM in any audio system ­ VIBE¹s FlatFlexTM OFC high definition speaker cable is produced from super fine OFC copper strands collectively picking up all the detail in your music ­ the multi strands are aligned making the cable super FLATTM which can be run invisibly under carpets.

Available in:

• Model: FlatFlexTM 16 SPK ­ 16 gauge High definition flat flexible speaker cable
• Model: FlatFlexTM 12 SPK ­ 12 gauge High definition flat flexible speaker cable

FLATBASS™ 13 SPK Bass speaker cable

There are many powerful bass amplifiers on today¹s market ­ the ever increasing power is putting huge strains on speaker wire ­ VIBE present a new breed of speaker cable specially developed for BASS applications ­ the VIBE FLATBASS speaker cable offers SolidCores� that can handle and sustain considerably more power than conventional speaker cable.

• Model: FlatBass 13 SPK ­ 13 gauge SolidCoreTM flat BASS speaker cable

AGU Fuse Holder

Water proof Fuse holder to be located 12² approx from battery ­ holds glass type AGU fuses and offers reliable system protection. This is included in stereo kits and active bass kits (AGU fuses available separately).

• Model: FDAGU-V1 ­ Inline AGU fuse holder

VIBE 140 amp circuit breaker

Big systems require big protection ­ The VIBE circuit breaker is rated at a massive 140 amps and offers critical protection to your system ­ if the system over powers or short circuits the breaker will cut in and save your equipment. No need to replace expensive fuses, the system is reset via a simple switch ­ also offers safe and instant system shutdown.

• Model: CB140 ­ 140 amp circuit breaker

VIBE FLAT Y 2M / FLAT Y 2F RCA Y leads

Our professional quality full range OFC Y-interconnect guarantees a pure and strong signal. With a flat design and ferrite loaded gold plated plugs interference is greatly reduced. The FLAT-Y Interconnect is available in 1 male ­ 2 female FLAT Y 2F and 2 male ­ 1 female FLAT Y 2M configurations.

• Model: FLAT Y 2F ­ RCA Y lead 1male to 2 female
• Model: FLAT Y 2M ­ RCA Y lead 2male to 1female Model shown

VIBE GB41 banana plug

The VIBE GB41 banana plugs are the easy and convenient way to quickly remove your bass enclosure without having to constantly re-thread your speaker cable into the box terminal, simply attach the speaker cable to the VIBE GB41 banana plug and you have a fast easy reliable quick release solution. Designed for optimum use with the TP-2 and QP-4 terminal, our professional gold plated 4mm banana plugs are polarity marked with rubber shrouds.

• Model: GB41 ­ Gold banana plug

VIBE DB6 non fused distribution block

The VIBE DB6 non fused distribution block is a professional non fused distribution block which gives easy connection for up to 5 amplifiers. The VIBE DB6 has 2 x 4AWG input and 4 x 8AWG outputs which can be used for power distribution or ground distribution giving a common grounding point for all system components eliminating the risk of ground loop interference.

• Model: DB6 non fused distribution block

VIBE FD4 fused distribution block

The VIBE FD4 fused distribution block is a professional AGU fused distribution block which gives easy connection for up to 4 amplifiers. The VIBE FD4 has 1 x 4AWG input and 4 x 8AWG outputs each individually fused up to a maximum of 80 amps (AGU fuses available separately)

• Model: FD4 ­ 4 way AGU fused distribution block, 1 x 4gauge input 4 x 8gauge outputs

VIBE CT0 / CT4 compression fit ring terminal

The VIBE CT range of gold plated ring terminals are professional compression fit designed for maximum conductivity when connecting power cable to the vehicle battery. The VIBE RT compression fit terminals are the best way to connect heavy gauge power cable to the vehicles battery.

• Model: CT0 ­ 0 gauge compression fit ring terminal
• Model: CT4 ­ 4 gauge compression fit ring terminal

VIBE RT4 / RT8 crimp on ring terminal

The professional range of VIBE RT ring terminals for connecting power cable to the vehicle battery. Packed in pairs and include red and black rubber over boots and easy crimp design.

• Model: RT8 ­ 1 pair of 8 gauge crimp on ring terminals with PVC overboots
• Model: RT4 ­ 1 pair of 4 gauge crimp on ring terminals with PVC overboots

VIBE AGU30, AGU60, AGU80 fuses

The VIBE AGU fuse series are the perfect companion to the VIBE FD4 distribution block and the Active and stereo system wiring kits. The VIBE AGU fuses are packed in pairs so you always have a spare fuse when you need one and are available in 30, 60 and 80 amp versions.

• Model: AGU30 ­ 1 pair 30 amp AGU fuses to fit all AGU fuse holders
• Model: AGU60 ­ 1 pair 60 amp AGU fuses to fit all AGU fuse holders
• Model: AGU80 ­ 1 pair 80 amp AGU fuses to fit all AGU fuse holders

There are currently no reviews. Be the first to write a review on this product click here